Jio F30c Flash File: LYF Jio F30c flash file hangs on the logo after testing File 2023, firmware flash tool is now available. Today, we'll go through how to flash an official stock ROM on a Jio F30c phone in great detail. Jio F30c debuted in 2019, however, it is still the most popular low-cost keypad cellphone for Jio consumers.
|Jio F30c Flash File|
Nevertheless, there are several software-related faults with the smartphone, such as Jio F30c stuck on Jio Logo, trapped in a boot loop, null IMEI problems, hanging issues, and auto reboot issues, among others. Thus, if you are one of those who are using a Jio F30c cellphone and experiencing software-related issues, this post may assist you in resolving these issues.
Download LYF Jio F30c Flash File
How To Flash Jio F30c?
- First, get the jio F30c Flash file.
- Install the QPST Tool.
- Boot Key- Volume Up + Volume Down
- Download and install the Qualcomm driver.
- Start the QPST tool.
- Create a new port. Connect the phone while holding down the boot key.
- Choose the Stock ROM file by clicking Browse.
- Choose Download and wait for the flashing to finish.
LYF Jio F30c Flash FIle Installation Requirements:
- Charge the device to around 80% to avoid inadvertent power off during the flashing procedure.
- Save the LYF Jio F30c flash file to your computer.
- Save the Jio F30c flash tool to your computer.
- Install or update the "LYF Jio F30c USB Drivers" as necessary. Alternatively, you may skip this step.
- A computer or laptop with a functional USB cord is required.
Boot Key Process:
- Turn off your mobile phone, remove the battery, and then replace it.
- Hold down the choose button and connect the USB wire from the mobile to the computer.
- The flashing procedure begins once you release the choose button.